DLZ stoplog gate

Short Description:

Design and Manufacture:JB/T8691,MSS SP-81

Face to face:GB/T15188.2,TAPPI TIS 405.8

Flange ends dimension:ANSI B 16.5,GB/T79-94

Inspection and Test:MSS SP-81,GB/T 13927 


Product Detail

Product Tags

DLZ stoplog gate

For plastic solids and high-viscosity slurries such as paper pulp, a specialty valve known as a knife gate valve is used to cut through the material to stop the flow. A knife gate valve is usually not wedge shaped and has a tapered knife-like edge on its lower surface.

DISTINCTIVE FEATURES    

□ Wafer or Semi-lugged
■ Full Lugged or Flanged
□ Bonnetless  Design
■ MSS SP-81 Complied
□ Cast Steel or Cast Iron
■ Soft Seat or Metal Seat
□ Uni or Bi Directional
■ API 6D & CE Certified

MAIN CHARACTERISTICS

FUTURE VALVE offer a broad line of universal knife gate valves covering resilient seat and metal to metal seat, ends connection in wafer, flanged and fully lugged which are widely used in various industries, including mining, power plant, urban sewage treatment, food and beverage, paper mill, petroleum, etc

DESIGN ADVANTAGES

Wafer or Fully Lugged bonnetless knife gate valves are with advantages of compact structure, reasonable design, material saving, reliable sealing, convenient operation, small volume, full passage flow, small flow resistance, small weight, easy installation and maintenance.

TECHNICALS & CAPABILITIES         

• Sizes Ranges from 2″ thru 80″, DN50 thru DN2000
• Pressure Ratings: PN6, PN10, PN16, ANSI # Cl125 & Cl150
• Ends Connections available in Wafer ends, Semi-lug, Lug type, or Double Flanged,
• Materials: Cast Iron, Carbon Steel, Stainless Steel, Duplex SS, Al-bronze, or other special alloys.
• Operation: Manually lever or gear, Electric, Pneumatic or Hydraulic, Electric
• Standard compliance: MSS SP-81, ASME B16.10, ASME B16.5, ASME B16.47, ASME B16.34, AS 2129 T/D or T/E, BS 4504 T/D OR T/E, MSS SP-55, EN 1092
• Compact design, one piece integral cast body, chest and lugs
• Integral cast in gate wedges minimize flow obstructions
• High quality gate finish for optimum sealing
• High flow rates with low pressure drops
• Robust and compact mounting yoke made of steel with self aligning gland box
• Gland packing made of PTFE impregnated Fibres
49 DLZ stoplog gate


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • dual plate check valve 315102/01

      dual plate check valve 315102/01

      DIN Marine valve - dual plate check valve 315102/01 Main parts and materials Parts name Material Body,Disc Bronze Shaft SS Seal NBR

    • three way clamped diaphragm valve(Inch) No.53113

      three way clamped diaphragm valve(Inch) No.53113

      three way clamped diaphragm valve(Inch) No.53113 Summarize Especially applied to sanitary and sterile course of pharmaceutical industry. •In comparison to design of othervalves,this diaphragm valve has advantages such as good flow capacity characteristics,easily cleaned,better treatment of granular material as wellless cavitation in application of flow control. •Diaphragm sheet offers sealing of valve body and valve seat and is quite suitable for the task of fluid control and opening/closing....

    • DIN fire hose valve 356722

      DIN fire hose valve 356722

      DIN Marine valve – fire hose valve 356722 Main parts and materials Parts name Material Body,Disc,Bonnet Bronze Stem Brass Packing PTFE

    • C-TOP with AS-I communication Bus-mastering

      C-TOP with AS-I communication Bus-mastering

      C-TOP with AS-I communication Bus-mastering Summarize AS-I interface is an on-the-spot bus-mastering system,which can connect actuator and sensor (detector)to higher control equipment (principal controller). •Creating a AS-I network requires electrical source,one or several main control modules.bus cable (actuating cable)and C-Top prepared for AS-I connection (special built-in card,connection cable,isolated displacement connector) •Voltage of AS-on-the-spot concentration line is supplied by ...

    • pneumatic clamped Butterfly type ball Valve(DIN) No.21321

      pneumatic clamped Butterfly type ball Valve(DIN...

      pneumatic clamped Butterfly type ball Valve(DIN) No.21321 Summarize This ball valve is applied to anypipeline and equipment of processcontrol,especially suitable forfermentation tank of wine making industry. •No matter at which direction fluid flows.handle can be installed on side valvebody. •No matter what kind of connectionmode,valve body can be replacedand total length of valve will not be changed. •Connection mode:welding,clamp,thread. •Connection standard:DIN,SMS,3A,ISO,IDF.RJT. •Handle...

    • hexagon equal nipple

      hexagon equal nipple

      Stainless steel hexagon equal nipple Summarize