pneumatic thread 3 way ball valve(DIN) No.23511

Short Description:

pneumatic thread 3 way ball valve(DIN) No.23511

 


Product Detail

Product Tags

pneumatic thread 3 way ball valve(DIN) No.23511

Tee ball valve is used for split flow,mixed flow and reversing flow.It is a multiple-port ball valve with two-sided or four-sided seat valve and any port can be used as inlet without and leakage.
Tee can be made into L-shaped port or T-shaped port.

033 schematic diaphragm for medium flow direction of tee ball Valve

 


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • pneumatic actuator

      pneumatic actuator

      pneumatic actuator

    • how to order knife gate valve slurry valve product overview

      how to order knife gate valve slurry valve prod...

      how to order knife gate valve slurry valve product overview   For plastic solids and high-viscosity slurries such as paper pulp, a specialty valve known as a knife gate valve is used to cut through the material to stop the flow. A knife gate valve is usually not wedge shaped and has a tapered knife-like edge on its lower surface

    • pneumatic reversing stop valve(DIN) No.32331

      pneumatic reversing stop valve(DIN) No.32331

      pneumatic reversing stop valve(DIN) No.32331 Summarize This reversing valve is a kind of sanitary level single seat pneumatic operating valve,and has wide application in beverage production,pharmaceutical and fine chemistry industry. •This seat valve is automatically operated by single action or double action pneumatic actuator.Compressed air pushes shaft to locate valve opening or closing position.180 degrees rotation of actuator cylinder ensures valve Normally-open and Nommally-close type. ...

    • BZ644G swing ceramic discharge valve

      BZ644G swing ceramic discharge valve

      BZ644G swing ceramic discharge valve For plastic solids and high-viscosity slurries such as paper pulp, a specialty valve known as a knife gate valve is used to cut through the material to stop the flow. A knife gate valve is usually not wedge shaped and has a tapered knife-like edge on its lower surface. DISTINCTIVE FEATURES     □ Wafer or Semi-lugged ■ Full Lugged or Flanged □ Bonnetless  Design ■ MSS SP-81 Complied □ Cast Steel or Cast Iron ■ Soft Seat or Metal Seat □ Uni or Bi Directional...

    • series F170 pinless wafer type butterfly valve without back sectional view

      series F170 pinless wafer type butterfly valve ...

      series F170 pinless wafer type butterfly valve without back sectional view and materials list Series F170 butterfly valves designed to comply with MSSSP-67,BS5155 and API 609. Compatible with GB,ANSI,DIN,BS flanges. Face to face according to ISO 5752 basic series 20(wafer type short). The seat of series F170 butterfly valve is designed into without back. The tongue-and -groove seat is lower torque and field replaceable. There is O-ring casted on the seal surface of the seat,negates need for ...

    • 3A end cap (14AMP)

      3A end cap (14AMP)

      3A end cap (14AMP) Summarize